Siroflex Incorporated

Product Description

Hybri-Sil is an adhesive/sealant based on MS Polymer chemistry. The product is odorless, neutral and isocyanate free. The low VOC formula meets American and European safety and environmental regulations regarding the emission of volatile organic compounds (VOCs).

Basic Uses

Hybri-Sil can be used to seal windows, doors, column joints, gutters, vents and ducts, roofs, crown molding and trim, siding and most areas where a sealant is needed. Hybri-Sil as an adhesive has a superior bond to most substrates, including porous and non porous surfaces.

Features

Can be applied in broad temperature range 0°F to 100°F
Waterproof
LOW VOC formula
Can be applied to damp or wet surfaces
No water washout
No odor
Paintable with latex based paints
Does not shrink or crack
Quick cure

Packaging

Hybri-Sil is available in 9 fl oz.(266ml) plastic cartridges with detachable 4” nozzle.

Limitations

Not recommended for application on Teflon, polypropylene or polyethylene surfaces.
Not for use on underwater application or for expansion joints.
Some alkyd paints may not be compatible with Hybri-Sil.

Typical Properties

Application Temperature 0°F to 100°F
Shrinkage 0%
Skinning Time: 15 minutes
Cure Time: 24/48 hours
Hardness Shore A: 40
Temperature Resistance after Cure:
-75°F to 350°F
Paintability: Acrylic or Latex paints
Cleanup: Mineral Spirits
Shelf Life: 12 months
Storage Temperature: 40°F to 80°F.

Storage

Product shelf life is 12 months for unopened cartridges stored between 40°F to 80°F.

Notice to Purchaser

Siroflex warrants its products to conform to Siroflex published specifications. The user shall determine the suitability of the product to their particular application. the foregoing warranty is in lieu of all o expressed or implied, including those of the merchantability or fitness for any purpose not expressly set forth herein. Manufacturer’s and seller’s liability for damage hereunder shall not exceed the purchase value of the goods used. IN NO EVENT SHALL MANUFACTURER OR SELLER BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT BY BUYER, BUYER’S USER, OR ANY OTHER PERSON. Notification of claim must be sent in writing to Siroflex, Inc. The notice should contain a statement as to how the product failed to meet our warranty, the proof of purchase and the amount of refund claimed.