LOW VOC, URETHANE ACRYLIC SEALANT AND ADHESIVE.
AVAILABLE IN MORE THAN 140 INDUSTRY COLORS IN STOCK.
High Performance, One Component, Urethane Acrylic Emulsion Sealant and Adhesive. Non-Hazardous, Non-Flammable, and Mildew Resistant.
DUO-SIL® is a special formulation of urethane and acrylic emulsion formulated for the professional applicator which can be used as an adhesive or caulking compound for commercial and residential construction. Our pre-formulated colors have been created to work with leading vinyl siding manufacturers. View our 140 colors in stock and our color cross reference spreadsheet to make color matching a snap on the job.
DUO-SIL Urethane Acrylic Sealant meets or exceeds the standard specifications for latex sealants. ASTM C-834-00, type C, Grade O°C.
DUO-SIL acrylic urethane sealant is a specially formulated high performance acrylic and urethane emulsion sealant that can be used as a sealant and adhesive for bonding most common building substances.Use to fill butt joints in vinyl cement and aluminum siding, windows, doors, brick, moldings, counter tops, and most areas where a sealant is needed. DUO-SIL is paintable and will not degrade polystyrene beadboard. DUO-SIL as an adhesive has superior bond to most building substrates. It adheres to wood, metal, concrete, gypsum board, vinyl board, cove base, moldings, foam board and more.
- Paintable with oil or latex paints after curing (48 hours)
- Easy to apply (tooling not required)
- Water clean up
- Flexible and will not crack or fade
- Excellent adhesion to most common substrates
- Non Hazardous, non flammable
- Low VOC formulation
Please contact Siroflex, Inc. Greenville, SC prior to writing specifications on this product.
Application Temperature 40ºF - 100º Shrinkage Approx. 30% Skinning Time
15 Minutes @ 70°F
Cure Time 1 - 2 Weeks
Hardness Shore A 68 Temperature Resistance
-30°F to 170°F Specific Gravity 1.09 Paintability With most paints Application Temperature 40°F to 90°F
Cleaning Uncured Sealant with Water Shelf Life 12 months Storage
Cool, dry, frost free conditions.
Available in 10.3 fl. oz. (305 mil) plastic cartridges with 4” screw on nozzle. There are 12 cartridges per case, and 140 cases per pallet.
Available in white, clear and over 140 colors.
- DO NOT apply below 35° F or when rain or freezing temperatures may occur within 24 hours. Apply when sealant and surface temperatures are between 45° F and 90° F.
- Not recommended for log homes.
- Not recommended for prolonged immersion in standing water.
- Keep from freezing – store at room temperature.
Clean up with soap and water.
Available through your local Siroflex distributor. Call 1-800-359-6398 or email email@example.com to find your local distributor.
Notice to Purchaser
Siroflex warrants its products to conform to Siroflex published specifications. The user shall determine the suitability of the product to their particular application. the foregoing warranty is in lieu of all o expressed or implied, including those of the merchantability or fitness for any purpose not expressly set forth herein. Manufacturer’s and seller’s liability for damage hereunder shall not exceed the purchase value of the goods used. IN NO EVENT SHALL MANUFACTURER OR SELLER BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS PRODUCT BY BUYER, BUYER’S USER, OR ANY OTHER PERSON. Notification of claim must be sent in writing to Siroflex, Inc. The notice should contain a statement as to how the product failed to meet our warranty, the proof of purchase and the amount of refund claimed.
Keep out of reach of children.
Do not take internally. Contains propylene glycol and mineral spirits.